Ovens Diagnostics

Monogram Ovens
Error Codes

Meanings, severity levels, safe checks you can perform, and when to call a technician.

Enter the code shown on your ovens display

Is it safe to keep using it?

Depends on code severity. Low/Medium codes often allow continued use, High severity requires immediate stop.

Can error codes be reset?

Some codes clear after power cycle. Persistent codes indicate underlying issues needing repair.

When should I stop using it?

Stop immediately for water leak codes, burning smell, or any High severity error.

Most Common Codes

F1 F2 F3 F5 F7 F9 F76 F0 F4 F6

All Codes

F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 F76

Error Code Directory

Click any code for detailed troubleshooting steps

Low Medium High

Code Meaning Severity Common Symptom

F0 Stuck keypad key Medium All keys on the wall oven control panel stop responding. Pressing Bake, Broil, or any other key has no effect while F0 is active. View F1 Oven sensor fault High The oven fails to produce heat after Bake or Broil is selected; F1 appears within seconds of starting a cooking function. View F2 Oven over-temperature High The wall oven cuts out abruptly during baking or broiling, leaving food undercooked, and displays F2 with an alarm. View F3 Open sensor circuit High The oven fails to begin heating when any cooking function is selected; the heating elements never receive power because the control cannot verify a temperature reading. View F4 Oven temperature sensor shorted High Oven refuses to heat or shuts off very shortly after the heating element energizes. View F5 Door latch fault Medium After a self-clean cycle ends, the door remains locked even after the oven has cooled for over an hour, and F5 is shown on the display. View F6 Analog-to-digital converter failure High Oven does not heat or aborts a heating cycle without reaching the set temperature. View F7 Stuck function key Medium A cooking mode — such as bake or broil — starts on its own without user input, as though a key is being held down continuously. View F8 Door lock mechanism failure (self-clean) Medium Self-clean cycle will not start or aborts in the first few minutes before the oven reaches cleaning temperature. View F9 Door latch timeout Medium The self-clean function begins its startup process — including attempting to lock the door — but aborts within two to three minutes and displays F9 without the oven reaching cleaning temperatures. View F76 Control communication fault High All oven functions stop abruptly mid-cooking, the display shows F76, and no cooking functions can be restarted until power is cycled. View

Monogram OvensError Codes