Monogram Dishwasher PF Error: Power failure / cycle interrupted
The PF code on a GE Monogram dishwasher stands for Power Failure. It is displayed when the appliance detects that power was interrupted while a wash cycle was in progress. The control board stores the cycle state in memory, and PF is shown after power is restored to inform the user that the previous cycle did not complete normally.
~90%
DIY Fixable
From $0
Typical Repair Cost
0-1 hrs
Pro Repair Time
Quick Assessment
Answer to continue safely
Is it safe to keep using?
Yes. PF is an informational notification, not a component fault. Once acknowledged, the dishwasher is safe to use normally. No repair is needed if the power interruption was a one-time event.
Can I reset the code?
Yes. Press Start/Resume to clear the PF code. If power supply is stable, the code does not return.
When to stop immediately?
Stop if you notice: Stop and investigate the electrical supply if PF appears repeatedly without any known power outage, which may indicate an intermittent wiring fault., Stop using the dishwasher and call an electrician if the circuit breaker trips repeatedly alongside PF codes..
Symptoms You May Notice
Dishwasher displays PF and remains paused when the kitchen power is restored after an outage or tripped breaker.
Wash cycle was running and does not automatically resume after power is restored.
Dishes are not clean or are still wet and soapy — the cycle was interrupted before completing.
Control panel is unresponsive to button presses until the PF notification is acknowledged or cleared.
Possible Causes
Utility power outage or brief voltage interruption that cut power to the appliance mid-cycle.
DIY PossibleTripped circuit breaker or blown fuse on the dishwasher dedicated circuit.
DIY PossibleLoose or intermittent connection at the outlet or junction box powering the dishwasher, causing it to drop power momentarily.
Requires ProfessionalSafe Checks You Can Do
-
1
Acknowledge the PF notification and restart
Press the Start/Resume button (or the button indicated on your model display) to acknowledge the PF code. The dishwasher may offer to resume the interrupted cycle or will return to a fresh start state. Select the desired wash cycle and press Start.
If the dishes were already through most of the cycle, a short rinse and heated-dry cycle is sufficient to finish rather than running a full wash again.
-
2
Check the circuit breaker
If PF appears without a known power outage, go to your electrical panel and confirm the dishwasher circuit breaker is firmly in the ON position. A partially tripped breaker will appear ON but can interrupt power intermittently.
Switch the breaker fully to OFF and then firmly back to ON to reset it, even if it appeared to be in the ON position.
When to Call a Professional
Contact a qualified technician if:
- PF recurs multiple times per week without a household power outage, indicating an intermittent fault in the wiring or outlet connection.
- The circuit breaker for the dishwasher trips repeatedly — a persistent breaker issue requires an licensed electrician, not an appliance technician.
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Dishwasher Repair Service Schedule Appointment