Sarah Mitchell Key Takeaways
- Surface burner igniter replacement is the most common and lowest-cost repair on ZDP and ZGP ranges, starting from $95.
- Control board failure can affect both cooktop ignition and oven functions simultaneously — budget from $310.
- 48-inch professional ranges require two-person labor for rear-access repairs; confirm whether a surcharge applies.
- Gas valve and manifold repairs must be performed by a licensed gas appliance technician.
- Providing the exact model number and symptom location helps technicians arrive prepared and reduces return visits.
The Bottom Line
Monogram professional range repairs start from $95 for individual igniter swaps and reach $310 or more for control board work — the professional-grade components justify repair in most scenarios given the high replacement cost.
Monogram range repair costs reflect the premium construction and high-BTU professional components found in ZDP dual-fuel and ZGP all-gas freestanding ranges. While Monogram ranges are built for longevity, when a component does fail the repair cost depends heavily on which system is affected and whether it is a gas, electric, or dual-fuel model.
Repair Cost Breakdown by Component
These estimates cover parts and standard labor for Monogram ZDP and ZGP 36-inch and 48-inch professional ranges.
- Surface burner igniter replacement — From $95 per burner. Individual igniters are low-cost parts; the labor is minimal if only one or two burners are affected.
- Ignition module replacement — From $175. The shared electronic ignition module serves all surface burners; replacement is required when all burners fail to spark simultaneously.
- Bake element (dual-fuel ZDP models) — From $155. The electric bake element in dual-fuel models is more accessible than in a standard wall oven but still requires clearing the oven cavity.
- Oven temperature sensor — From $120. A quick repair that resolves oven temperature accuracy issues on both ZDP and ZGP models.
- Oven control board — From $310. Range control boards handle both surface ignition and oven functions; a board failure can affect multiple systems at once.
- Gas valve replacement — From $220. Individual burner gas valves can stick or fail to open fully, causing low flame output that cleaning cannot resolve.
- Convection fan motor — From $180. Required for even heat distribution in ZDP and ZGP ovens; failure produces noticeable hot and cold spots.
- Range grate or burner cap (cosmetic damage) — From $65 per piece. Cast-iron grates and brass burner caps are available as OEM replacement parts and are not covered under standard warranty.
48-Inch vs. 36-Inch Labor Considerations
Monogram 48-inch ZDP and ZGP ranges are among the heaviest freestanding appliances in a residential kitchen, weighing over 300 lbs. Moving the unit for rear-access repairs is a two-person job and adds labor cost compared to the same repair on a 36-inch model. Some service companies apply a surcharge for oversized professional ranges — confirm this when requesting a quote.
Gas-Related Repairs and Safety
Any repair involving the gas supply manifold, main gas shutoff, or burner valve assembly should be performed by a licensed professional familiar with gas appliances. Do not attempt to reseat or replace gas valves without proper training and leak detection equipment. After any gas-side repair, confirm there are no leaks with a soapy water test at all connections before relighting the range.
Get an Accurate Quote
Monogram ZDP and ZGP ranges have the model number on a label inside the oven door frame or on the back of the unit. Specify whether your unit is 36-inch or 48-inch, dual-fuel or all-gas, and describe whether the problem is on the cooktop surface or inside the oven cavity. This detail allows the service company to quote accurately and arrive with the correct parts.
Understanding monogram range repair costs in Detail
Monogram range repair costs span a wide band depending on whether the fault is in a burner component, the oven section, or the electronic control system. Burner igniter repairs on ZDP and ZGP models start from $120 total, making them among the most affordable service calls for these premium appliances. Oven control board replacements start from $380 total and represent the most common mid-range repair.
Gas valve and burner valve failures are less frequent but more expensive to address. A gas valve assembly replacement starts from $220 in parts, with total repair costs from $380 depending on which valve is involved. These repairs require a licensed gas technician in most jurisdictions, which adds a credential cost to the service call. Attempting gas valve work without proper certification is a safety risk and may void the Monogram warranty.
Owners comparing monogram range repair costs against replacement pricing should note that ZDP and ZGP series ranges start from $5,500. Even repairs in the $600 to $900 range represent a fraction of replacement cost for these professional-grade appliances. Monogram ranges are designed with serviceable components, and OEM parts remain available for most models for at least 10 years after manufacture.
Related Resources
Explore more Monogram Range repair and maintenance information:
- Monogram Range Repair Service
- Monogram Range Error Codes
- When to Replace Your Monogram Range
- Schedule a Repair
For official Monogram product information and support, visit GE Monogram Support. For safety recalls, check the CPSC Recall Database.